[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: date(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone.
[phpBB Debug] PHP Notice: in file /viewtopic.php on line 988: getdate(): It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone.
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4505: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4507: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4508: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
[phpBB Debug] PHP Notice: in file /includes/functions.php on line 4509: Cannot modify header information - headers already sent by (output started at /includes/functions.php:3706)
Sagan Technology Metro • View topic - LOSING MIDI CONNECTION!!!!!!!

Sagan Technology Metro

The place to interact with other Metro users.

Skip to content

LOSING MIDI CONNECTION!!!!!!!

Topics related to MIDI
Post a reply

LOSING MIDI CONNECTION!!!!!!!

Postby Gary K. Doty Sr. » Sun Apr 25, 2004 10:54 pm

I am using a eMac 700mhz/512meg(OSX 10.3.3) and I am using a Edirol UM1USB 1X1 midi interface and running Metro 6.1. build 10 i have been using this set up for a while.
I installed edirol driver 1.1.1 and know while i'm recording midi the midi just drops out and i get no midi input, but it will playback existing tracks.
I am running into a Alesis QS6.1
when I go to OsX midi setup and click on test midi I get the old there is a problem hold the restart button and reboot.
Has anyone had these problems?
I even went as far as reformating my hard drive and reinstalling OSX 10.3.3
Is it a Metro problem or a driver porblem?
I've check my system Techtool Deluxe and it finds no problem,
ANY SUGGESTIONS!!!!!!
gary
Gary K. Doty Sr.
 
Posts: 29
Joined: Wed Feb 12, 2003 3:03 am
Location: Lithia Springs , Ga
Top

Postby Scoot » Sun Apr 25, 2004 11:20 pm

When I had a similar dropout.......or rather no input only output, Jerm suggested shutting down, and leaving the mac a bit.

It worked....though I don't know why.

:lol:


scoot.
Scoot
 
Posts: 1124
Joined: Tue Feb 11, 2003 10:50 pm
Location: New Zealand
Top

Postby kaboombahchuck » Mon Apr 26, 2004 1:29 am

If you have been using a midi editor with the Q 6, it may have made it go wonky. I've messed up my nanosynth (Q 6) module a couple of times doing this. Re-initializing the nano was the only fix. Other wise I'd go with the driver of the ederol needing an update.
kaboombahchuck
 
Posts: 66
Joined: Thu Dec 11, 2003 7:21 am
Location: Chandler Az.
Top

Re: LOSING MIDI CONNECTION!!!!!!!

Postby Jerm » Mon Apr 26, 2004 9:58 am

Gary K. Doty Sr. wrote:when I go to OsX midi setup and click on test midi I get the old there is a problem hold the restart button and reboot.

A system kernel panic indicates a serious problem. Definitely go to the disk utility and try repairing permissions. If this does not work it could be a driver or a hardware problem such as memory. It is not possible for Metro to cause this message.
Jerm
 
Posts: 2707
Joined: Tue Feb 11, 2003 12:50 pm
Location: Massachusetts
Top

Found the problem!

Postby Gary K. Doty Sr. » Mon Apr 26, 2004 4:57 pm

Well I found out what was causing the problem.
It was my powered usb hub. It is a USB 1.0 hub and I need to get a 2.0 hub.
How I fixed my problem is I put the usb midi interface direct to the computers usb port and it has been working great.
I had been using this hub all along with no problem but I upgraded the edirol driver for panther and it went crazy! but it working fine now.
Thanks Guy's for the responses.
I have just upgraded to Metro 6.2 and I ready to try it out.
METRO IS THE BEST PROGRAM!!!!!!!!!!!!WITH THE BEST SUPPORT!!!!!!!
Thanks Jeremy!!!!!

Gary K. Doty Sr.
Gary K. Doty Sr.
 
Posts: 29
Joined: Wed Feb 12, 2003 3:03 am
Location: Lithia Springs , Ga
Top

Re: Found the problem!

Postby Scoot » Mon Apr 26, 2004 8:36 pm

Gary K. Doty Sr. wrote:I had been using this hub all along with no problem but I upgraded the edirol driver for panther and it went crazy!



I wonder if that points to the panther driver (or panther itself) using power from the USB differently or something?
Problems with hub recognition maybe?
Scoot
 
Posts: 1124
Joined: Tue Feb 11, 2003 10:50 pm
Location: New Zealand
Top
Post a reply

Return to MIDI

Who is online

Users browsing this forum: No registered users and 2 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group