I recorded 4 midi tracks (organ/bass/guitar/drums) and then I switch them to sound fonts. When I go to quit Metro it comes up that "The Application
Metro G4 has unexpectedly Quit" and sometimes when I load this file is says
"The Application
Metro G4 has unexpectedly Quit"
I have a eMac 700mhz/256meg/Edirol 1x1 midi interface/Edirol 1x1 audio interface. I am running OSX 10.2.8
could it be the sound fonts? I have used them before with no problem.
Thanks
Gary
Sound Fonts application shut down
Moderator: w
6 posts
• Page 1 of 1
Sound Fonts application shut down
by Gary K. Doty Sr. » Mon Nov 17, 2003 4:19 pm
- Gary K. Doty Sr.
- Posts: 29
- Joined: Wed Feb 12, 2003 3:03 am
- Location: Lithia Springs , Ga
by Jerm » Tue Nov 18, 2003 2:04 pm
Gary,
I cannot reproduce this problem. Both files load up and play back fine (of course I do not have a QS-1).
There are many problems with what you are doing here though. For what you are doing all you need is 1 instance of the DLS-Soundfont synth installed on an Aux buss. The other problem is that you have no audio outputs. To fix this problem do these steps.
• remove all instances of the DLS-soundfont synth
• add one instance of the DLS to aux 1
• from modify outputs and busses, add 16 outputs on port dls and 1 (or more) outputs on built-in audio
• assign unique outputs (e.g. dls-1, dls-2, dls-3) to all of your tracks.
I cannot reproduce this problem. Both files load up and play back fine (of course I do not have a QS-1).
There are many problems with what you are doing here though. For what you are doing all you need is 1 instance of the DLS-Soundfont synth installed on an Aux buss. The other problem is that you have no audio outputs. To fix this problem do these steps.
• remove all instances of the DLS-soundfont synth
• add one instance of the DLS to aux 1
• from modify outputs and busses, add 16 outputs on port dls and 1 (or more) outputs on built-in audio
• assign unique outputs (e.g. dls-1, dls-2, dls-3) to all of your tracks.
- Jerm
- Posts: 2707
- Joined: Tue Feb 11, 2003 12:50 pm
- Location: Massachusetts
by Gary K. Doty Sr. » Tue Nov 18, 2003 6:13 pm
Jeremy,
sometimes it shuts down when i load the file,
most of the time it will play the files,
but when I go to shutdown Metro under "quit"
it starts to shut down normally but then comes up with
"APPLICATION METRO G4 has unexpectedly quit.
I will set up the DLS soundfonts as you suggested and I will see what
happen
Thanks
Your support is excellant!!!
Gary
sometimes it shuts down when i load the file,
most of the time it will play the files,
but when I go to shutdown Metro under "quit"
it starts to shut down normally but then comes up with
"APPLICATION METRO G4 has unexpectedly quit.
I will set up the DLS soundfonts as you suggested and I will see what
happen
Thanks
Your support is excellant!!!
Gary
- Gary K. Doty Sr.
- Posts: 29
- Joined: Wed Feb 12, 2003 3:03 am
- Location: Lithia Springs , Ga
by Scoot » Tue Nov 18, 2003 6:29 pm
Since you are in OSX, it might be an idea to send Jerm the crash logs that the console program creates.
Console is usually found in the utilities folder in the applications folder.
Console prefs - enable crash reporting.
A handy tool for programmers to find out what's causing your crash.
scoot.
Console is usually found in the utilities folder in the applications folder.
Console prefs - enable crash reporting.
A handy tool for programmers to find out what's causing your crash.
scoot.
- Scoot
- Posts: 1124
- Joined: Tue Feb 11, 2003 10:50 pm
- Location: New Zealand
6 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests